Why is there a dull phenomenon in the crusher?

source: http://en.tsxbsy.com/news370596.html  release time: 2018-9-20 9:38:00

Lithotripsy can be divided into medical lithotripsy and mining lithotripsy according to the major categories. Mining stone crusher is adapted to crush hard rock in mass mines in principle. Its typical grain size of granite discharge is less than 40 mm, accounting for 90%. It can handle materials with side lengths less than 100-500 mm. Its compressive strength can reach up to 350 MPa. It has the advantages of high crushing ratio and cubic particles after crushing. Mining crushing machinery refers to the crushing machinery whose grain size is more than three millimeters and whose content accounts for more than 50% of the total discharge. Well, do you know why the crusher is prone to boring? Let's take a look at it.

1, during the operation of the crusher, the voltage instability tends to fluctuate. No matter whether the voltage is too high or too low, it is very likely to cause a dull phenomenon in the equipment. Therefore, we need to check the voltage to see if it is normal.

2. When the crusher is in operation, the belt or conveyor belt sheds off, so it is easy to cause the equipment to stop running. To avoid this, it is necessary to check if the belt is aging when starting the ore crusher.

3, the crusher outlet is blocked, resulting in the broken materials can not be discharged in a timely manner. Although the probability of equipment stuffing caused by this reason is very small, it is still necessary to guard against micro-gradual, operators more observation. More than

is the reason why the crusher is stuffy. We hope to help you. Eight hundred and eighty-eight thousand one hundred and eleven


tag:

Copyright©2017-2020  Tangshan City Xin Bao Industrial Co., Ltd.
Record number:鍐€ICP澶?9049565鍙?1 鎶€鏈敮鎸?浣愰€旂鎶€ Powered by Nest