source: http://en.tsxbsy.com/news370584.html release time: 2018-9-6 11:05:00
The counter-impact crusher can deal with materials with side length less than 100-500 mm, with a maximum compressive strength of 350 MPa, with a large crushing ratio, the broken materials are cubic particles and so on. Widely used in building materials, ore crushing, railways, expressways, energy, transportation, energy, cement, mining, chemical and other industries for fine and medium-sized materials. The size of the discharging granularity can be adjusted, and the crushing specification is diversified. Do you know what matters needing attention in the operation of the impact crusher? Let's take a look at it.
nbsp; nbsp; nbsp; 1. when the machine is running, the staff can not stand within the inertial force action line, the installation of electrical switches should avoid this position.
nbsp; nbsp; nbsp; 2. when the machine is running, it is forbidden to open the inspection door to observe the situation in the machine, to make any adjustments, to clean up and repair and other work, so as to avoid danger.
nbsp; nbsp; 3. It is strictly forbidden to throw materials into the machine that can not be broken to avoid damaging the machine.
4, the impact crusher should first turn off the power supply when overhauling.
5. During the operation of the machine, the machine must not be overloaded.
nbsp; nbsp; 6. Electrical equipment should be grounded, wire should be reliable insulation, and installed in snake skin bag.
nbsp; nbsp; 7. when using the hydraulic opening and closing system, it is strictly prohibited that there are people in the two directions of the upper cover movement. After opening, the pad must be padded at the lower part of the arm, and ensure that it is reliable and safe for other work. Above
is counterattack crusher operation need to pay attention to matters, I hope to help everyone. Eight hundred and eighty-eight thousand one hundred and eleven