source: http://en.tsxbsy.com/news370580.html release time: 2018-8-30 11:00:00
Lithotripsy can be divided into medical lithotripsy and mining lithotripsy according to the major categories. Mining stone crusher is adapted to crush hard rock in mass mines in principle. Its typical grain size of granite discharge is less than 40 mm, accounting for 90%. It can handle materials with side lengths less than 100-500 mm. The highest compressive strength of
can reach 350 MPa. It has the advantages of large crushing ratio and cubic particle after crushing. Mining crushing machinery refers to the crushing machinery whose grain size is more than three millimeters and whose content accounts for more than 50% of the total discharge.
then do you know what causes the crusher to be shut down? Let's take a look at it.
1. During the operation of the crusher, the voltage instability appears to fluctuate. No matter whether the voltage is too high or too low, it is very likely to cause a dull phenomenon in the equipment. Therefore, we need to check the voltage to see if it is normal.
2. when the crusher is working, the belt or conveyor belt has fallen off, so it is easy to cause the equipment to stop running. To avoid this, it is necessary to check if the belt is aging when starting the ore crusher.
-nbsp; 3. the outlet of crusher is blocked, resulting in the crushed materials can not be discharged in time. Although the probability of equipment stuffing caused by this reason is very small, it is still necessary to guard against micro-gradual, operators more observation. More thanis the cause of the crusher's boring machine, and I hope it can help you. Eight hundred and eighty-eight thousand one hundred and eleven