source: http://www.tsxbsy.com/news/3533.html release time: 2018-10-08
Do you know how to repair the bowl shaped bearing of cone crusher? Let's take a look at it.
First of all, we overhauled the fixing of the bowl-shaped tile. The bowl-shaped tile is fixed on the bearing seat by casting zinc with a cylindrical pin. If loose, we should recast zinc alloy. Otherwise, when lifting the moving cone, it will be sticking to the ball surface of the moving cone, together with the lifting accident; the contact surface of the bowl-shaped tile should be in contact with the outer ring of the bowl, its contact ring width is 0.3-0.5 feet, if the contact is too large, should be re-scraped; when the tile surface wears to the bottom of the ditch or exposes a fixed pin and cracks should be replaced; Bowl-shaped bearing seat and frame should be closely matched, such as grinding out the clearance, when running bearing seat in series, will cause the main shaft and its taper sleeve contact is not good, or even impact each other. After this gap, the dustproof water will splash into the body and destroy the lubrication. If the gap is greater than 2 mm, it should be repaired or replaced. Therefore, it is suggested that customers should operate correctly in production, do not blindly deal with the problem, in order to avoid unnecessary trouble. Above
is cone crusher bowl bearing damage repair methods, I hope to help you. Eight hundred and eighty-eight thousand one hundred and eleven